SpectraPure CSPDI 2:1 Manual Flush RO/DI Systems -300 GPD
The SpectraPure CSPDI 2:1 Manual Flush RO/DI System - 300 GPD (CSPDI-300-MF) is engineered for ultra-high-purity water production with a sustained 2:1 waste-to-product ratio. Upgraded for 2022, this system features SpectraPure's 99% ultra-high-rejection SpectraSelect™Plus TFC membrane, along with 0.5 micron Sediment and Carbon Block Pre-Filtration Stages, and a Super-DI™ SilicaBuster™ High-Capacity DI Cartridge. With a new 3-Probe TDS Meter, water purity levels are monitored at various stages to ensure "000 TDS" product water. The periodic membrane flushing helps preserve membrane life and performance by rinsing accumulated impurities and waste water from the membrane surface. Included accessories like the feed valve, ASO valve, float valve, pressure gauge, and hose adapter contribute to the system's efficiency and ease of use. The clear filter housings and durable, rust-resistant mounting bracket enhance visibility and stability. This system is designed to maximize pure water production through the utilization of top-quality TFC RO membranes and specialty deionization cartridges.
Description
Specifications
Video Links
User Manual
SpectraPure CSPDI 2:1 Manual Flush RO/DI Systems -300 GPD
CSPDI-300-MF
SpectraPure® Low-Waste CSPDI 4-Stage RODI System w/ Manual Membrane Flush. Upgraded for 2022, the new CSPDI incorporates SpectraPure’s individually tested, 99% ultra-high-rejection SpectraSelect™Plus TFC membrane, 0.5 micron Sediment & 0.5 micron Carbon Block Pre-Filtration Stages, a Super-DI™ SilicaBuster™ High-Capacity DI Cartridge, and a sturdy, powder-coated wall mount bracket. With the new 3-Probe TDS Meter, water purity levels are now monitored at the membrane feed, at the membrane output, and at the DI stage output, assuring “000 TDS” product water.
Periodic membrane flushing rinses accumulated impurities and concentrated waste water from the membrane surface. Membrane life and performance are preserved, allowing for a sustained 2:1 waste-to-product ratio. Feed valve, ASO valve, float valve, pressure gauge, and hose adapter are all included. Ultra-high-purity water at an economical price, CSP™ RODI purification systems maximize pure water production through application of our best TFC RO membranes and specialty deionization cartridges.
FEATURES:
- High rejection thin film composite (TFC) Reverse Osmosis membrane*
- Ultra pure water and extended membrane life
- SilicaBuster™ DI cartridge with semiconductor grade resins
- Long life - high efficiency 0.5 MicroTec micron sediment filter
- 0.5 micron carbon block pre-filter with 20,000 ppm-gal chlorine removal capacity.
- Dual-probe TDS meter
- Pressure gauge monitors membrane feed pressure and prefilter status
- Clear filter housings
- Durable, no rust mounting bracket
- 6 foot feed tubing, 6 foot product and waste lines included
- Housing wrench for easy filter removal
- Garden hose adapter for tap water hookup
- Dimensions: 15 inch x 7 inch x 16 inch
- 1 year manufacturer's warranty
Membrane Information
90 GPD Systems = MEM-SP-0090
150/300 GPD Systems = MEM-SP-0150
- Typical stabilized conductivity rejection 99%, min. conductivity rejection 98%.
- Membranes produce rated GPD ± 20% at 60 psi.
- Permeate flow and conductivity rejection based on 500 ppm, 77°F (25°C) softened water feed, 15% recovery and the specified applied pressure.
Warning: Spectrapure does not recommend drinking water produced from deionization (DI) as DI resins are typically not made of food grade approved material.
*RO and RODI systems that are installed areas with low feed-water pressure often require a booster pump to optimize system operation.
The correct Booster Pump to be used with SpectraPure’s Manual Membrane Flush (-MF) RO or RODI Systems is SpectraPure’s auxiliary High-Flow Booster Pump Kit P/N: BPHF-MF-115. This kit is designed specifically for use with SpectraPure Manual-Flush Systems. Other booster pump kits are not compatible with SpectraPure Manual-Flush (-MF) systems.